If you ride a chain-driven motorbike, you’ve probably heard people say that chain maintenance can be a massive headache, but it doesn’t have to be. Your chain is exposed to grit and rain whenever you ride, but they’re generally very robust.
If given a little bit of regular attention, you can easily stave off excessive wear and keep it in decent condition.
1. Inspect your chain regularly
Check the tension and look for any obvious damage and worn or stiff links. Rotate the wheel and make sure the tension is consistent, rather than tight or slack at different points.
If you see rust, make sure it is only surface rust by testing that it can be removed with cleaning and lube. Remove any excessive grime that might have accumulated from road salt or other debris.
2. Clean your chain often
Road grime and old lubricant can quickly build up on your motorbike’s chain. If you ride off-road very often, you might need to clean your chain more often, too.
Put the bike on a centre stand and use a dedicated motorcycle chain cleaner. There are many spray-on versions to get right into crevices. Make sure you also use a specialised chain brush (no wire brushes!) and a microfibre cloth to remove the grime.
Rinse off the loosened dirt using low-pressure water and dry the chain thoroughly.
3. Lubricate your chain
Lubricating your chain regularly reduces friction and can help to keep it free from corrosion. Check your bike’s manual for any recommendations from the manufacturer. If possible, apply the lube when your chain is still warm from a ride. This will help it to soak into all your chain’s crevices.
Following these simple steps can help improve the longevity of your bike’s chain, but if you do need repairs, our motorcycle transport service can help you get your bike to the shop for tinkering.

